JVL MAC050 User Manual page 270

5.7 Expansion Module MAC00-FD4
5.7.25 Necessary accessories to MAC-FD4:
On our web page
the MAC00-FD4 module, in the menu Field bus Interface Specifications Files.
EDS means Electronic Data Sheet. This file contains the information about the MAC00-
FD4 settings, that may be required to configure the setup and program in the master.
The MAC00-FD4 is a slave module on the DeviceNet-bus line, the master can be for ex-
ample a PLC or a PC. If you are using a PLC as master, then make sure that it is provided
with a DeviceNet® communications module, and that the correct programming tools
are available. For getting support to the PLC master, it is more rewarding to use the PLC
vendor.
The MacTalk program can be used to monitor various operations and make the initial set
up on the motor see also
MacTalk is not a free-ware program. Please contact your JVL representative for further
information.
266
www.jvl.dk you can, under the downloads menu, find the EDS file for
Using MacTalk to setup the motor, page
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
123.