Expansion Module Mac00-B42 - JVL MAC050 User Manual

5.4

Expansion module MAC00-B42

5.4.1 Expansion module MAC00-B42 — overall description.
The MAC00-B42 is meant to be used as a small PLC with its 12 I/O terminals that can be
read and written to from an user program in the basic motor.
The expansion module MAC00-B42can ONLY be mounted and used in following mo-
tors:
• MAC400
• MAC402
• MAC800 but only in newer versions with serial numbers >85000.
• MAC1500 - 4500
Please notice that the module is NOT recommended to be used in the MAC050 to 141
motors since the following I/O terminals will not be active: IN1 to IN8 and O1 to O4.
All other I/O terminals will be operative.
This module is among the simplest and lowest cost modules in the product range.
The modules contain no intelligence (microprocessor) meaning that all functionality is
controlled via the basic motor.
The MAC00-B42 expansion module offers an industrial interface (M12 connectors) and
a number of feature enhancements, including:
• Full backward compatible with the MAC00-R4 module.
• Standard M12 connectors for optimum reliability.
• Full RS232 protocol support for use with standard serial cable.
• Full RS485 protocol support for multipoint communication up to 100m.
• 8 digital isolated inputs for 24V logic to be used with an user program in the motor.
• 4 digital isolated outputs for 24V logic to be used with an user program in the motor.
Each output can supply up to 700 mA and is short circuit rated.
• LED indicators for I/O supply and main supply (control voltage).
Typical applications for these expansion modules are:
• Stand alone applications where the build in user program handles the local I/O's
• Replacement for pneumatic cylinders using the "Air Cylinder mode"
• Dispenser systems.
• Machine adjustment/setup by sending RS232 or RS485 commands.
• Standalone PLC with user program stored in the basic motor.
172 JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Only MAC400 to 4500
TT1279-01GB