5.11 Expansion Module MAC00-R1/R3/R4
5.11.25
Wait for an input combination before continuing (multiple inputs)
Icon:
Dialogue:
Function:
334
Waits for a specified input condition to occur. The next line in the program will not be exe-
cuted until the input condition has been met. If "Input type" is set to "Multiple", multiple inputs
can be tested for being either high or low. The "Operand" setting determines whether one
or all of the inputs must meet their test criterion. If set to "And" all inputs must match their
test settings. If set to "Or" only one input need to match its test setting. Inputs that are set to
"Don't care" are not tested. The inputs are tested with 30 microsecond intervals.
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500