JVL MAC050 User Manual page 287

5.8 Expansion Module MAC00-FP2/FP4
BUS1
Primary Profibus-DP
connector.
M12 - 5pin male
connector including:
Profibus-DP interface
BUS2
Secondary Profibus-DP
connector:
M12 - 5pin female
connector including:
Profibus-DP interface
5.8.14 Expansion MAC00-FP4 hardware description
The MAC00-FP4 offers IP67 on MAC050-141 protection and M12 connectors which
make it ideal for automation applications where no additional protection is desired. The
M12 connectors offer solid mechanical protection and are easy to unplug compared to
the FP2 module which has cable glands. The signals available are restricted compared to
the FP2 module since only 4 I/O terminals are available. The I/O's connected to these 4
terminals must be selected by a small dip-switch.
The connector layout:
"PWR" - Power input. M12 - 5-pin male connector
Signal
name
P+
P+
P-
CV
P-
* Note: P+ and P- are each available at 2 terminals. Make sure that both terminals are connected in order to split the supply
current in 2 terminals and thereby avoid an overload of the connector.
"BUS1" - Profibus-DP interface. M12 - 5-pin male connector
Signal
name
-
A-
DGND
B+
SHIELD
(Continued next page)
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Expansion module MAC00-FP4 front plate
TT1008GB
Description
Main supply: MAC050-141=+8-48VDC.
MAC400 to 4500=+18-32VDC.
Connect with pin 2 *
Main supply: MAC050-141=+8-48VDC.
MAC400 to 4500=+18-32VDC.
Connect with pin 1 *
Main supply ground. Connect with pin 5 *
Control voltage: MAC050-141=+8-48VDC.
MAC400 to 4500=+18-32VDC.
Main supply ground. Connect with pin 3 *
Description
Reserved for future purpose - do not connect
Terminal A (Siemens syntax) for the Profibus-DP
interface
Profibus-DP interface ground
Terminal A (Siemens syntax) for the Profibus-DP
interface
Cable shield. Internally conn. to the motor housing.
PWR
Power
M12 - 5pin male
connector including:
P+, P- and secondary
supply (optional).
I/O
M12 - 8pin female
connector including:
RS232 Interface
Selectable I/O's such
as analogue input, O1,
O2, IN1, NL, PL.
JVL Cable
WI1000M1
Pin 2
no. F5T05N
1 Brown
2 White
3 Blue
4 Black
5 Grey
Cable:
Pin user
no. supplied
1 -
2 -
3 -
4 -
5 -
Isolation
group
1
1
1
1
1
Isolation
group
2
2
2
2
2
283