JVL MAC050 User Manual page 237

5.6 Expansion Mod. MAC00-FC2/FC4/FC41
CAN bus connectors.
4
1
Male - front view
TT1096GB
5.6.60 MAC00-FC2 Connectors
Rear plate layout:
The MAC00-FC2 module is function as node in the CAN bus network, and the following
terminals are available: B+ and A- are "Bus in", and B+ and A- are "Bus out". The con-
nectors are placed on the dismantled module as the figure show below:
TT1069GB
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
5-pin style connector
5
3
3
2
2
Female - front view
Expansion module MAC00-FC2 front plate
I/O
M16 cable gland
Available signals:
RS232 Interface general
I/O's such as analogue
input (AIN), O1, O2,
IN1-IN4, NL, PL
and secondary supply
(optional).
BUS1
Primary CANopen
connector. M16 cable
gland supporting screen
Cable glands
CAN-open and I/O
connectors.
9-pin D-sub connector
5
1 2 3 4 5
4
1
6 7 8 9
Male - front view
TT1007GB
Dip Switches placed
on the rear side of the
module
5 4 3 2 1
9 8 7 6
Female - front view
PWR
Power
M12 - 5pin male
connector including:
P+, P-.
BUS2
Second CANopen
connector
M16 cable gland
supporting screen.
Internal circuit boards
233