JVL MAC050 User Manual page 130

4.2 Using MacTalk to setup the motor
4.2.4 Working offline
As seen in the bottom info line, the motor is disconnected and the file data is currently
present in MacTalk. To re-establish communication with the motor, simply press the Go
Online button and if any data has been changed a warning box appears enabling the user
to save current data before re-establishing communication with the motor as this will
overwrite existing data in MacTalk.
If data is changed in MacTalk the user is warned that current data in MacTalk may be
overwritten and needs to be saved. The following warning message box appears.
Choosing "No" will immediately upload all motor data, pressing "Yes" will save all data
in the open file.
126 JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
TT1152-01GB
TT1154GB