JVL MAC050 User Manual page 334

5.11 Expansion Module MAC00-R1/R3/R4
5.11.22 Conditional jump (multiple input)
Icon:
Dialogue:
Function:
330
Tests for an input condition, before either jumping to another line in the program, or moving
on to the next line in the program. If the condition is met, the command jumps to the spec-
ified program line. If the condition is not met, the program proceeds to execute the next line
in the program. When "input type" is set to "Multiple", Multiple inputs can be tested for being
either high or low.
The "Operand" setting determines whether one or all of the inputs must meet their test cri-
terion. If set to "And", all inputs must match their test settings. If set to "Or", only one input
need to match its test setting.
Inputs that are set to "Don't care" are not tested.
After pressing the OK button, the dialogue will disappear, and the mouse cursor will
change. The next program line that you click on will then become the destination for the
jump command.
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500