JVL MAC050 User Manual page 322

5.11 Expansion Module MAC00-R1/R3/R4
5
Press the second button to create
the second program line
6
Choose the movement type needed.
Relative: Move x counts forward with
reference to the actual position.
Absolute: Move to the x position with
reference to the zero search position.
7
The relative move command just
entered is converted into a program
line.
8
Multiple program lines are
entered by the user forming
the last part of the program.
9
Now the program is finished.
Press the
button.
Now the program will be transfered
and stored permanently in the module.
The program will be executed
immidiately
TT0984GB
318
"Transfer & Start"
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Continued