JVL MAC050 User Manual page 344

5.11 Expansion Module MAC00-R1/R3/R4
5.11.35 Calculator (Options)
Icon:
Dialogue:
Function:
340
The options tab contains various settings that affect the operation of the Calculator com-
mand. "Calculation precision" is, at the time of writing, locked to 32-bit precision. This is not
an error, and should not be reported. "Register listing and naming" provides an alternative
method of entering data into the dialogue, by selecting "simple list with short firmware
names". Instead of selecting, for example, "3 Requested position" to access register no. 3,
you can simply type "P_SOLL". If you wish to enter a constant, you simply enter the digits-
the dialogue will not mistake the constant for a register number.
If you are in doubt about a register name, look at the expression in the caption of the dia-
logue box. A recognized register name will appear in the expression.
An unrecognised register name will appear as a zero. You can switch between the two
methods of data entry at any time.
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500