Expansion Module Mac00-B41 - JVL MAC050 User Manual

5.3

Expansion module MAC00-B41

5.3.1 Expansion module MAC00-B41 — overall description.
The expansion module MAC00-B41can ONLY be mounted and used in following mo-
tors:
• MAC400
• MAC402
• MAC800 but only in newer versions with serial numbers >85000.
• MAC1200 to MAC4500
Please notice that the module is NOT recommended to be used in the MAC050 to 141
motors since the following I/O terminals will not be active: IO1 to IO6, AIN2, (USB) and
Multifunction 2 (A2/B2). All other I/O terminals will be operative.
This module is among the simplest and lowest cost modules in the product range.
The modules contain no intelligence (microprocessor) meaning that all functionality is
controlled via the basic motor.
The MAC00-B41expansion module offers an industrial interface (M12 connectors) and a
number of feature enhancements, including:
• Standard M12 connectors for optimum reliability
• Optical isolated communication covering RS232, RS485 and USB (2.0)
• Full RS232 protocol support for use with standard serial cable.
• Full RS485 protocol support for multipoint communication up to 100m.
• 6 high speed I/O channels that individually can be used as inputs or outputs. Each
channel can (when used as output) source up to 300mA.
• Dual supply. The main supply can be removed but the control circuitry is kept active
and position data and communication are still functional.
• Standard M12 connectors for optimum reliability
Typical applications for these expansion modules are:
• Closed loop systems with an overall controller involved.
• Replacement for pneumatic cylinders using the "Air Cylinder mode"
• Dispenser systems.
• Machine adjustment/setup by sending RS232 or RS485 commands.
• Standalone PLC with user program stored in the basic motor.
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Only MAC400 to 3000
seen from rear side
TT1133GB
MAC00-B41
155