JVL MAC050 User Manual page 110

3.2
3.2.29 Current consumption
The supply current measured in each of the 3 supply phases is as follows:
MAC1500 at nominal shaft load (at 3000RPM)
@400VAC
2.53 ARMS
MAC1500 at peak shaft load (at 3000RPM)
@400VAC
7.59 ARMS
MAC3000 at nominal shaft load (at 3000RPM)
@400VAC
5.06 ARMS
MAC3000 at peak shaft load (at 3000RPM)
@400VAC
15.18 ARMS
MAC4500 at nominal shaft load (at 3000RPM)
@400VAC
7.59 ARMS
MAC4500 at peak shaft load (at 3000RPM)
@400VAC
22.77 ARMS
Please notice that the current values shown above is nominal values. Higher values may
appear depending on the quality of the supply.
3.2.30 Emergency stop
Please consult the chapter:
106
Power Supply
@460VAC
2.17 ARMS
@460VAC
6.50 ARMS
@460VAC
4.34 ARMS
@460VAC
13.00 ARMS
@460VAC
6.51 ARMS
@460VAC
19.50 ARMS
Emergency stop considerations, page 384
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
@480VAC
2.08 ARMS
@480VAC
6.24 ARMS
@480VAC
4.16 ARMS
@480VAC
12.48 ARMS
@480VAC
6.24 ARMS
@480VAC
18.72 ARMS
Only MAC1500/3000