JVL MAC050 User Manual page 267

5.7 Expansion Module MAC00-FD4
BUS1
Primary DeviceNet
connector.
M12 - 5pin male
connector including:
DeviceNet interface
BUS2
Second DeviceNet
connector
M12 - 5pin female
connector including:
DeviceNet interface
5.7.22 Expansion MAC00-FD4 hardware description
The MAC00-FD4 offers IP67 protection on MAC050 to MAC4500 and M12 connectors
which make it ideal for automation applications where no additional protection is de-
sired. The M12 connectors offer solid mechanical protection and are easy to operate.
The I/O signals available are restricted since only 4 I/O terminals are available. The I/O's
connected to these 4 terminals must be selected via a small dip-switch.
The connector layout:
"PWR" - Power input. M12 - 5-pin male connector
Signal
name
P+
P+
P-
CV
P-
* Note: P+ and P- is each available at 2 terminals. Make sure that both terminals are connected in order to split the supply
current in 2 terminals and thereby avoid an overload of the connector.
"BUS1" - DeviceNet interface. M12 - 5-pin male connector
Signal
name
Drain
V+
V-
CAN_H
CAN_L
(Continued next page)
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Expansion module MAC00-FD4 front plate
TT1016GB
Description
Main supply +8-48VDC for MAC50-141 and +18-
32VDC for MAC400 to MAC4500. Connect with pin
2 *
Main supply +8-48VDC for MAC50-141 and +18-
32VDC for MAC400 to MAC4500. Connect with pin
1 *
Main supply ground. Connect with pin 5 *
Control voltage +8-48VDC for MAC050-141
and +18-32VDC for MAC400-4500.
Main supply ground. Connect with pin 3 *
Description
Shield for the DeviceNet interface - internally con-
nected to the motor housing
DeviceNet supply. Note that the MAC00-FP4 only
senses at this terminal. The MAC00-FP4 contains
its own power supply
DeviceNet ground
DeviceNet interface. Positive signal line
DeviceNet interface. Negative signal line
PWR
Power
M12 - 5pin male
connector including:
P+, P- and secondary
supply (optional).
I/O
M12 - 8pin female
connector including:
RS232 Interface
Selectable I/O's such
as analogue input, O1,
O2, IN1, NL, PL.
JVL Cable
WI1000M1
Pin 2
no. F5T05N
1 Brown
2 White
3 Blue
4 Black
5 Grey
Cable:
Pin user
no. supplied
1 -
2 -
3 -
4 -
5 -
Isolation
group
1
1
1
1
1
Isolation
group
2
2
2
2
2
263