JVL MAC050 User Manual page 131

4.2 Using MacTalk to setup the motor
4.2.5 MacTalk in "Quiet" mode
By activating "Quiet" mode, all live communication with the motor stops. It does not
mean that it is not connected, but simply that value are not refreshed without user re-
fresh/request.
All setup changes made in the setup, will be communicated to the motor and setup result
will be read and presented in MacTalk.
Background functionality, such as overload protection, is still active in the motor.
The internal ePLC program will also continue to run.
JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
Quiet mode On/Off
User Refresh
Accept Quiet mode
TT1289GB
127