YASKAWA GA800 Technical Reference page 70

Ac drive for industrial applications

Hide thumbs Also See for GA800:

Table of Contents

3.2 Electrical Installation

Standard Drive Connection Diagram

Set the wiring sequence to de-energize the drive with the fault relay output. If the drive outputs a fault during fault restart when you use

the fault restart function, set L5-02 = 1 [Fault Contact at Restart Select = Always Active] to de-energize the drive. Be careful when you

use a cut-off sequence. The default setting for L5-02 is 0 [Active Only when Not Restarting].

Figure 3.1 Standard Drive Connection Diagram

YASKAWA SIEPC71061737D GA800 Drive Technical Reference

Troubleshooting