YASKAWA GA800 Technical Reference page 50

2.7 Install the Keypad in a Control Panel or Another Device
A - Keypad
B - Mounting bracket A
4.
Put the mounting bracket that has the attached keypad in the control panel, and use the screws to attach it
from the outside.
Use the screws included with the installation support set to attach it. Tighten the screws to a correct tightening
torque:
• M4 screws: 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
A - M4 screws
50
Figure 2.17 Attach Keypad to Mounting Bracket
Figure 2.18 Mount Mounting Bracket to the Interior of the Control Panel
C - M3 screws
D - Screw mounting holes
B - Enclosure panel
YASKAWA SIEPC71061737D GA800 Drive Technical Reference