Table of Contents
Advertisement
Hardware
Clears all configuration settings.
n
All firmware updates are deleted.
n
Deletes all user files.
n
Regenerates SSH keys.
n
Clears event and system log files.
n
Creates a new event in the event log, indicating a factory reset.
n
Note
While the settings are reset, the device's firmware version remains the same.
1. Make sure that the Connect EZ has been powered on for at least 30 seconds.
2. Locate the Erase button on the
3. Using a pinhole tool, press and briefly hold the Erase button.
4. The device resets to factory defaults and then reboots automatically.
Discover the device's IP address: Additional methods
The IP address is used to login to the Web UI for the device. If you do not have access to the
Navigator, you can use either of these methods to discover the IP address.
Discover the IP address using a Micro USB cable
n
Manually configure the PC and assign an IP address to the device
n
Discover the IP address using a Micro USB cable
You can use a Micro USB cable and a terminal emulation application to determine the device's
IP address.
Prerequisites
A
power supply
n
Access to a terminal emulation application.
n
A Micro USB cable.
n
To use the terminal emulation application to discover the device's IP address:
1. Connect one end of a Micro USB cable to your device and the other end to your PC.
2. Use the terminal emulation application to discover the device's IP address.
a. Access the terminal emulation application.
b. Log in to the Connect EZ.
n
n
c. Type a to enter the Admin CLI.
d. Type show network to show all devices currently connected to the network.
e. Scroll down until you discover the Connect EZ.
f. Write down the IP address shown for the device.
Digi Connect EZ 4/4i User Guide
front of the
must be connected to the device and the device powered on.
User name: admin
Password: The unique password printed on the device label.
Discover the device's IP address: Additional methods
device.
Digi
38
Advertisement
Table of Contents
