Analyzer Save; Analyzer Start; Analyzer Stop; Clear Dhcp-Lease Ip-Address - Digi IX14 User Manual

Command line interface
Parameters
name: Name of the capture filter to use.

analyzer save

Saves the current captured traffic to a file.
Syntax
analyzer save <name> <filename>
Parameters
name: Name of the capture filter to use.
filename: The filename to save captured traffic to. The file will be saved to the device's
/etc/config/analyzer directory.

analyzer start

Start a capture session of packets on this devices interfaces.
Syntax
analyzer start <name>
Parameters
name: Name of the capture filter to use.

analyzer stop

Stops the traffic capture session.
Syntax
analyzer stop <name>
Parameters
name: Name of the capture filter to use.

clear dhcp-lease ip-address

Clear the DHCP lease for the specified IP address.
Syntax
clear dhcp-lease ip-address ADDRESS
Parameters
address: An IPv4 or IPv6 address

clear dhcp-lease mac

Clear the DHCP lease for the specified MAC address.
IX14 User Guide
Command line reference
801