Table of Contents
Advertisement
Configuration and
management
Enabled
n
SSID: Digi-Connect EZ-serial_number
n
Encryption: WAP2 Personal (PSK)
n
Pre-shared key: The unique password printed on the bottom label of the device.
n
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Wi-Fi > Digi AP.
4. Enter a new SSID and Pre-shared key.
5. Click Apply to save the configuration and apply the change.
Command line
1. Log into the Connect EZ command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
Digi Connect EZ 4/4i User Guide
Reset default SSID and pre-shared key for the preconfigured Wi-Fi access
point
46
Advertisement
Table of Contents
