Hotspot Radius Attributes - Digi Connect EZ 4 User Manual

Hotspot
f. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
g. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Hotspot RADIUS attributes

The RADIUS server may send attributes to the hotspot to affect the operation of a client session. For
example, here are some of the RADIUS attributes that the hotspot handles:
Session-Timeout
n
Idle-Timeout
n
Acct-Interim-Interval
n
WISPr-Redirection-URL
n
WISPr-Session-Terminate-Time
n
ChilliSpot-Max-Input-Octets
n
ChilliSpot-Max-Output-Octets
n
ChilliSpot-Max-Total-Octets
n
Also, if the RADIUS server requests it, the hotspot will send accounting information back to the
RADIUS server. For example, here are some of the RADIUS attributes that the hotspot sends:
Acct-Input-Octets
n
Acct-Output-Octets
n
Acct-Session-Time
n
Acct-Input-Packets
n
Acct-Output-Packets
n
Acct-Input-Gigawords
n
Acct-Output-Gigawords
n
Digi Connect EZ 4/4i User Guide
Hotspot RADIUS attributes
309