Digi Connect EZ 4 User Manual page 626

Applications
c. Enter or select the device ID of the device.
d. Click Add.
e. Click OK.
3. Click Examples > SCI > Data Service > Send Request.
Code similar to the following will be displayed in the HTTP message body text box:
<sci_request version="1.0">
<data_service>
<targets>
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
</targets>
<requests>
<device_request target_name="myTarget">
my payload string
</device_request>
</requests>
</data_service>
</sci_request>
Note The value of the target_name parameter in the device_request element must
correspond to the target parameter of the device_request.register function in the Python
script. In this example, the two are the same.
4. Click Send.
Once that the request has been sent to the device, the handler on the device is executed.
On the device, you will receive the following output:
n
>>> received request
>>>
In Remote Manager, you will receive a response similar to the following:
n
<sci_reply version="1.0">
<data_service>
status="0">OK</device_request>
</data_service>
</sci_request>
Example: Use digidevice.cli with digidevice.device_request
In this example, we will use the digidevice.cli module in conjunction with the digidevice.device_
request module to return information about multiple devices to Remote Manager.
Digi Connect EZ 4/4i User Guide
my payload string
for target myTarget
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
<requests>
<device_request target_name="myTarget"
</requests>
</device>
Digidevice module
626