Table of Contents
Advertisement
Hotspot
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Download the file to your local machine. For example:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/etc/config/hotspot/login.html to remote
admin@192.168.4.1's password: adminpwd
login.html
>
Note
The files in the hotspot directory are only available after hotspot has been enabled for
the first time.
3. On your local machine, edit the file as needed.
4. Upload the edited file from your local machine the the Connect EZ device. For example:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/etc/config/hotspot/login.html to local
admin@192.168.4.1's password: adminpwd
login.html
>
Upload custom hotspot HTML pages
Rather than editing the sample HTML pages, you can upload a custom login page with a different
filename.
The new page should include ChilliLibrary.js and call the same JavaScript functions that the sample
HTML pages do. Additional pages and assets can be uploaded to the hotspot folder, and additional
subfolders can be created as needed. Supported file extensions include: .html, .gif, .js, .jpg, .mp4, .ogv,
.png, .swf, .json, and .dat.
You can configure the Connect EZ device to use your custom HTML page using either the WebUI or the
command line:
WebUI
1. Upload your custom HTML file to the Connect EZ device's filesystem:
a. Log into the Connect EZ WebUI as a user with Admin access.
b. On the menu, click System. Under Administration, click File System.
Digi Connect EZ 4/4i User Guide
Customize the hotspot login page
306
Advertisement
Table of Contents
