Digi Connect EZ 4 User Manual page 239

Wi-Fi
4. Set the SSID for the Wi-Fi access point. Up to 32 characters are allowed.
(config network wifi ap new_AP)> ssid my_SSID
(config network wifi ap new_AP)>
SSID broadcasting is enabled by default for new access points.
5. Set the security for the access point to wpa2:
(config network wifi ap new_AP)> encryption type wpa2
(config network wifi ap new_AP)>
6. (Optional) Determine whether to prevent clients that are connected to this access point from
communicating with each other:
(config)> network wifi ap digi_ap isolate_clients true
(config)>
See Isolate Wi-Fi clients
access points from communicating with each other.
7. Configure one or more RADIUS servers:
a. Set the IP address of the RADIUS server:
(config network wifi ap new_AP)> encryption radius_servers 0 host IP_
address
(config network wifi ap new_AP)>
b. Set the secret key as configured on the RADIUS server:
(config network wifi ap new_AP)> encryption radius_servers 0 key
secret_key
(config network wifi ap new_AP)>
c. (Optional) Set the RADIUS server's port. The default is 1812.
(config network wifi ap new_AP)> encryption radius_servers 0 port port
(config network wifi ap new_AP)>
d. (Optional) Add and configure additional radius servers:
i. Add a server:
(config network wifi ap new_AP)> add encryption radius_servers end
(config network wifi ap new_AP encryption radius_servers 1)>
ii. Configure the new server as described above. For example, set the server IP address:
(config network wifi ap new_AP encryption radius_servers 1)> host
IP_address
(config network wifi ap new_AP encryption radius_servers 1)>
iii. Repeat for additional radius servers.
8. (Optional) Set the amount of time to wait before changing the group key.
Digi Connect EZ 4/4i User Guide
Configure a Wi-Fi access point with enterprise security
for information about how to prevent clients connected to different
239