Table of Contents
Advertisement
Hardware
Item
Name
5
ETH2
6
Wi-Fi LED
7
Cell LED
8
Signal LED
9
Power LED
10
SIM button
11
Erase button
12
Power
Wi-Fi LED descriptions
Wi-Fi LED
Off
Digi Connect EZ 4/4i User Guide
Description
Use the ETH 2 port to connect to a second Ethernet
port. This is useful for redundancy or if you have more
than one network.
The ETH2 LED shows the status of the connection.
Shows the status of the Wi-Fi connection. For more
information, see
information.
Shows the status of the cell service connection. The
Cell and Signal LEDs work together to display some
status information. See
descriptions.
Shows the strength of the cellular signal. The Cell and
Signal LEDs work together to display some status
information. See
descriptions.
The Power LED shows the status of the power supply
connection.
The SIM button is used to manually toggle between
the two SIM slots included in the DIGI Core Module.
Note
the Digi CORE module. See
the CORE
Use this button to
Connect the power supply. See
supply.
Description
Both the access point and Wi-Fi client are unconfigured.
Yellow (left): There is activity on the port.
n
Green (right): The port is in use.
n
Wi-Fi LED descriptions
Cell service and signal LED
Cell service and signal LED
Solid green: The power source is connected
n
and power is being supplied to the device.
Flashing green: The
Find Me feature
n
activated.
This feature is useful only if you have connected
Cellular connection: Insert
module.
reset the device
Front panel and LEDs
for more
has been
to factory defaults.
Connect the power
32
Advertisement
Table of Contents
