Analyzer Save; Analyzer Start; Analyzer Stop; Clear Dhcp-Lease Ip-Address - Digi IX30 User Manual

Command line interface
Clears the traffic captured by the analyzer.
Syntax
analyzer clear <name>
Parameters
name: Name of the capture filter to use.

analyzer save

Saves the current captured traffic to a file.
Syntax
analyzer save <name> <path>
Parameters
name: Name of the capture filter to use.
path: The path and filename to save captured traffic to. If a relative path is provided,
/etc/config/analyzer will be used as the root directory for the path and file.

analyzer start

Start a capture session of packets on this devices interfaces.
Syntax
analyzer start <name>
Parameters
name: Name of the capture filter to use.

analyzer stop

Stops the traffic capture session.
Syntax
analyzer stop <name>
Parameters
name: Name of the capture filter to use.

clear dhcp-lease ip-address

Clear the DHCP lease for the specified IP address.
Syntax
clear dhcp-lease ip-address ADDRESS
IX30 User Guide
Command line reference
1003