Connect To And Access The Digi Navigator; Discover The Ip Address When Connected To A Network - Digi Connect EZ 4 User Manual

Serial port
Section Description
Connect Expand a device to be able to access the web UI for the device and configure the
EZ device device to use RealPort.
n
n
RealPort Click RealPort Devices at the bottom of the screen to display a list of devices that are
Devices configured to use

Connect to and access the Digi Navigator

Your device must be connected to your network or a laptop before you can access the Digi Navigator.
1. Connect a power supply
2. Use an Ethernet cable
If you are connected to a computer, you will need to determine the default IP address.
n
If you are connected to your network, the Connect EZ is automatically assigned an IP address.
n

Discover the IP address when connected to a network

To discover the IP address for a Connect EZ device connected to your network, the Digi Navigator uses
the HTTPS service by default. Other services can be used, if needed.
1. Make sure your
2. Launch the Digi Navigator.
3. Click Filters from the green toolbar to expand the toolbar and display the filter options.
4. In the Services Filters section, click the enable button to enable the services that you want to
use to find an IP address.
5. Click Filters at the bottom of the expanded toolbar to minimize the toolbar and hide the
filters.
Digi Connect EZ 4/4i User Guide
Access web UI: Click Open to
Configure RealPort: Click Configure device for Realport and Configure this
PC for RealPort to configure the device to use
RealPort.
to the device and power it on.
to connect the device to your network or computer.
device is connected to the network
Digi Navigator application
access the web UI for the device.
RealPort.
and the Digi Navigator is installed.
211