Digi Connect EZ 4 User Manual page 297

Hotspot
5. Configure the RADIUS server:
a. Set the fully qualified domain name or IP address of the primary RADIUS server:
(config)> network hotspot hotspot_name radius primary_radius_server
address
(config)>
b. (Optional) Set the fully qualified domain name or IP address of the secondary RADIUS
server, used if the primary RADIUS server is unreachable:
(config)> network hotspot hotspot_name radius backup_radius_server
address
(config)>
c. (Optional) Set the port number to use for RADIUS authentication requests.
(config)> network hotspot hotspot_name radius auth_port port
(config)>
The default is 1812.
d. (Optional) Set the port number to use for RADIUS accounting requests.
(config)> network hotspot hotspot_name radius acct_port port
(config)>
The default is 1813.
e. Set the shared secret for the RADIUS server. This is configured on the RADIUS server.
(config)> network hotspot hotspot_name radius secret secret
(config)>
f. Set the unique Network Access Server (NAS) identifier used by the RADIUS server:
(config)> network hotspot hotspot_name radius nas_id id
(config)>
The default is hotspot.
g. (Optional) Enable Swap Octets to swap the meaning of the input octets/packets and
output octets/packets RADIUS attributes. This can fix issues if the data limits and/or
accounting reports appear to be reversed on the RADIUS server:
(config)> network hotspot hotspot_name radius swap octets true
(config)>
The default is disabled.
6. Set walled garden settings.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of the RADIUS server(s) that are being
used for authentication.
Digi Connect EZ 4/4i User Guide
Hotspot configuration
297