Digi Connect EZ 4 User Manual page 130

Interfaces
d. Server Port number defaults to 1812. Type a new port number for the authentication
server if different than the default.
e. Type the Server Password for the authentication server.
f. Set the Reauth period.
g. (Optional) Click to expand Accounting.
h. Click Enable server to enable 802.1x authentication auditing on the Connect EZ device.
i. Type the Server IP address of the auditing server.
j. Server Port number defaults to 1813. Type a new port number for the auditing server if
different than the default.
k. Type the Server Password for the auditing server.
9. Configure IPv4 settings:
a. Click to expand IPv4.
IPv4 support is enabled by default.
b. For Type, select Static IP address.
c. For Address, type the IP address and subnet of the LAN interface. Use the format IPv4_
address/netmask, for example, 192.168.2.1/24.
d. Optional IPv4 configuration items:
i. Set the Metric.
ii. For Weight, type the relative weight for default routes associated with this interface.
For multiple active interfaces with the same metric, Weight is used to load balance
traffic to the interfaces.
iii. Set the Management priority. This determines which interface will have priority for
central management activity. The interface with the highest number will be used.
iv. Set the MTU.
e. Enable the DHCP server:
i. Click to expand DHCP server.
ii. Click Enable.
See DHCP servers
10. See Configure DHCP relay
11. (Optional) Configure IPv6 settings:
a. Click to expand IPv6.
b. Enable IPv6 support.
c. For Type, select IPv6 prefix delegration.
d. For Prefix length, type the minimum length of the prefix to assign to this LAN. If the
minimum length is not available, then a longer prefix will be used.
e. For Prefix ID, type the identifier used to extend the prefix to the assigned length. Leave
blank to use a random identifier.
f. Set the Metric.
g. For Weight, type the relative weight for default routes associated with this interface. For
multiple active interfaces with the same metric, Weight is used to load balance traffic to
the interfaces.
Digi Connect EZ 4/4i User Guide
for information about configuring the DHCP server.
for information about configuring DHCP relay.
Local Area Networks (LANs)
130