Table of Contents
Advertisement
Applications
2. Determine the name of scripts that are currently running:
> show scripts
Index
-----
0
1
>
3. Start the script:
)> system script start script1
>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Stop a script that is currently running
You can stop a script that is currently running.
WebUI
1. Log into the Connect EZ WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:
3. For scripts that are currently running, click Stop Script to stop the script.
Command line
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
Digi Connect EZ 4/4i User Guide
Label
Enabled
-----------
-------
script1
true
script2
true
Stop a script that is currently running
Status
Run time
------
--------
active
idle
01:00
612
Advertisement
Table of Contents
