Digi Navigator Features - Digi Connect EZ 4 User Manual

Serial port
Note Microsoft Visual C++ must be installed to ensure that Realport can be installed. Microsoft Visual
C++ is installed by default during the Digi Navigator install process, if it is not already installed on your
computer.
1. Navigate to the Digi Connect EZ drivers support page.
2. Click Digi Navigator to start the download.
3. Click the downloaded file to install the tool.
4. If Microsoft Visual C++ is not currently installed on your computer, the installation process for
this application begins.
a. Click OK to begin installation.
b. The Microsoft Visual C++ installation screen closes automatically when installation is
complete.
5. Click Finish to complete installation of the Digi Navigator.

Digi Navigator features

All features of the Digi Navigator are available from the main application screen.
Section Description
Green From the toolbar at the top of the screen, you can apply filters and access Digi Remote
toolbar Manager.
Filters: Click Filters to expand the filters section and apply
Filters, and
Digi Remote Manager: Click Digi Remote Manager to
Specify a Expand the Specify a device section to enter the IP address of a Connect EZ device
device and then
Digi Connect EZ 4/4i User Guide
Default IP Filters. Click Filters again to minimize the filters section.
configure the device to use
Digi Navigator application
Device
launch Remote
RealPort.
Filters, Service
Manager.
210