Hardware; Front Panel And Leds - Digi Connect EZ 4 User Manual

Hardware

Front panel and LEDs

Item Name
1 Wi-Fi
2 Console
3 Serial ports 1-4
4 ETH1
Digi Connect EZ 4/4i User Guide
Description
Connect a Wi-Fi antenna to the device. For connection
instructions, see Connect the Wi-Fi
Use the USB console port to access the web UI on the
device if a network is not available.
For example, you can use a micro USB cable to
connect the device to your laptop and then find the IP
address for the device. See
using a Micro USB cable.
Use the serial ports to connect to devices and
equipment to the Connect EZ. See
equipment to the Connect EZ serial
The serial port LED shows the status of the
connection.
Yellow (left): The port is in use. The LED may
n
be solid or blink, depending on the traffic
speed.
Green (right): A device is connected to the
n
port.
Use the ETH1 port to connect the device to your local
network, using an Ethernet cable.
The ETH1 LED shows the status of the connection.
Yellow (left): There is activity on the port.
n
Green (right): The port is in use.
n
antenna.
Discover the IP address
Connect
port.
31