System administration
Schedule system maintenance tasks
You can configure tasks to be run during a specified maintenance window. When the device is within
its maintenance window, firmware updates and Digi Remote Manager configuration checks will be
performed.
You can also schedule custom scripts to run during the maintenance window. See
run automatically
Required configuration items
Events that trigger the maintenance window to begin.
n
Whether all configured triggers, or only one of the triggers, must be met.
n
The tasks to be performed. Options are:
n
Firmware updates.
l
Digi Remote Manager configuration check.
l
Whether the device will check for updates to the device firmware.
n
Whether the device will check for updates to the modem firmware.
n
The frequency (daily, weekly, or monthly) that checks for firmware updates will run.
n
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Scheduled tasks > System maintenance.
4. Click to expand Maintenance window triggers.
Digi Connect EZ 4/4i User Guide
for more information.
Schedule system maintenance tasks
Configure scripts to
776