Table of Contents
Advertisement
Interfaces
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create the WAN or select an existing WAN:
To create a new WAN, for Add interface, type a name for the WAN and click .
n
To edit an existing WAN, click to expand the WAN.
n
The Interface configuration window is displayed.
New WANs are enabled by default. To disable, click Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select External.
7. For Device, select an Ethernet device, a Wi-Fi client, or a bridge. See
information about bridging.
8. (Optional) Click to expand 802.1x to configure 802.1x port based network access control.
The Connect EZ can function as an 802.1x authenticator; it does not function as an 802.1x
supplicant.
a. Click to expand Authentication.
b. Click Enable server to enable the 802.1x authenticator on the Connect EZ device.
c. Type the Server IP address of the authentication server.
d. Server Port number defaults to 1812. Type a new port number for the authentication
server if different than the default.
e. Type the Server Password for the authentication server.
f. Set the Reauth period.
g. (Optional) Click to expand Accounting.
h. Click Enable server to enable 802.1x authentication auditing on the Connect EZ device.
Digi Connect EZ 4/4i User Guide
Wide Area Networks (WANs)
Bridging
for more
106
Advertisement
Table of Contents
