Table of Contents
Advertisement
Serial port
7. Select the Encrypt Network Traffic check box to enable encrypted network traffic. When you
select this option, the TCP Port for Encrypted Traffic field becomes available.
8. The TCP Port for Encrypted Traffic field has a default value of 1027. The entry must match
the device's TCP port setting. You can verify the setting on the device using the web interface
on the device.
a. Open browser window.
b. Enter the IP address in the URL address bar to access the web interface.
c. Choose Network > Network Services Settings.
d. Select the Enable Encrypted RealPort option and verify that the port number is 1027.
e. Click Apply.
9. Click OK.
10. Click Apply.
Configure the serial port for RealPort mode
RealPort mode allows you to use Realport.
To change the configuration to match the serial configuration of the device to which you want to
connect:
WebUI
1. Log into the Connect EZ WebUI as a user with Admin access.
2. On the menu, click System. Under Configuration, click Serial Configuration.
The Serial Configuration page is displayed.
Note
You can also configure the serial port by using Device Configuration > Serial. Changes
made by using either Device Configuration or Serial Configuration will be reflected in both.
3. Click the name of the port that you want to configure.
The serial port is enabled by default. To disable, toggle off Enable.
4. For Mode, select RealPort.
Digi Connect EZ 4/4i User Guide
Configure RealPort mode
191
Advertisement
Table of Contents
