Delete Captive Portals - Digi Connect EZ 4 User Manual

Firewall
9. (Optional) Set a message that will appear on the portal page:
(config firewall portal portal1)> message "Welcome to the corporate web
portal"
(config firewall portal portal1)>
10. (Optional) Set the terms and conditions that ill appear on the portal page. Users will be
required to agree to the terms and conditions before being granted access to the portal.
(config firewall portal portal1)> terms "Accept the terms and conditions
of this portal"
(config firewall portal portal1)>
11. (Optional) Set the URL to which the user will be directed when granted access to the portal. If
left blank, the user will be directed to the domain of the URL in the original access request.
(config firewall portal portal1)> url https://myportal.com
(config firewall portal portal1)>
12. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
13. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Delete captive portals

To delete captive portals:

WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Captive portals.
4. Click the down caret () next to the appropriate captive portal and select Delete.
5. Click Apply to save the configuration and apply the change.
Digi Connect EZ 4/4i User Guide
Configure captive portals
738