Update The Firmware On The Connect Ez - Digi Connect EZ 4 User Manual

Get started with Connect EZ 4/4i
Note You can also use the Digi Navigator to access the web UI and configure the device. See
the web UI from the Digi
1. Make sure that an Ethernet cable is connected to the Connect EZ's ETH 1 port and to a laptop
or PC.
2. Open a browser and enter the
3. Log into the device using the default user name and password. The default user name is admin
and the default password is the unique password printed on the label packaged with your
device.
4. After logging in, the local web admin dashboard is displayed.
The dashboard shows the current state of the device.
Dashboard
area Description
Summarizes network statistics: the total number of bytes sent and received over all
Network
configured bridges and Ethernet devices.
activity
Digi Remote Displays the device connection status for Digi Remote Manager, the amount of time
Manager the connection has been up, and the Digi Remote Manager device ID.
See
Device Displays the Connect EZ device's status, statistics, and identifying information.
Network
Displays the status of the network interfaces configured on the device.
Interfaces
For more information, see
NEXT STEP: Proceed to the next step:

Update the firmware on the Connect EZ

You should update the firmware on the device to ensure that you have the latest features.
1. Log into the Connect EZ Web UI as a user with Admin access.
2. On the main menu, click System. Under Administration, click Firmware Update.
3. Click Download from server.
Digi Connect EZ 4/4i User Guide
Step 7: Connect to the web UI and update the Connect EZ firmware
Navigator.
IP address
Using Digi Remote Manager.
Using the web interface.
Update the firmware on the Connect
for the device.
Access
EZ.
26