Table of Contents
Advertisement
Get started with Connect EZ 4/4i
Configure Wi-Fi on the device
You can configure a device to be a Wi-Fi client or a Wi-Fi access point.
Note
For more detailed information about Wi-Fi configuration, see Wi-Fi.
Client
You can configure the device as a client that can connect to a Wi-Fi access point.
Configure a Wi-Fi client and add client networks
n
Access point
You can configure the device to be a Wi-Fi access point.
Configure an open Wi-Fi access point
n
Configure a Wi-Fi access point with personal security
n
Configure a Wi-Fi access point with enterprise security
n
NEXT STEP: If you are performing the initial device set-up, proceed to the next step:
the IP address using the Digi
Step 5: Discover the IP address using the Digi Navigator
You can use the
Digi Navigator
Make sure you have the device powered and connected the device to your network or computer with
an Ethernet cable. See
Note
If you don't have access to the Digi Navigator, you can use a manual method to discover the
IP address. See
Discover the device's IP address: Additional
1.
Download and install
2. Launch the Digi Navigator.
3. The tool discovers the Connect EZ devices that are powered on and connected to your
network. When the process is complete, a list of the devices appears.
Connected to a network: By default, the HTTPS service is enabled and used to find an
n
IP address for the Connect EZ. Other services can be enabled if needed from the Filters
section. See
Connected directly to a device or on a network with no DHCP server: In either of
n
these situations, a default IP address is assigned to the device. You can specify the
filters used to assign an IP address. See
4. Expand a device to display the IP address.
NEXT STEP: If you are performing the initial device set-up, you should proceed to the next step after
getting the device's IP address:
Digi Connect EZ 4/4i User Guide
Step 5: Discover the IP address using the Digi Navigator
Navigator.
to quickly discover the IP address for the Connect EZ.
Connect to and access the Digi
the Digi Navigator.
Discover the IP address when connected to a
Step 6: Configure RealPort from the Digi
Navigator.
methods.
network.
Discover the IP address when not on a
Navigator.
Step 5: Discover
network.
23
Advertisement
Table of Contents
