Table of Contents
Advertisement
Wi-Fi
Configure security for the access point to use personal security.
n
The password (preshared key) that clients will used to connect to the access point.
n
LAN/bridge assignment. Once you configure a Wi-Fi access point, you must assign the Wi-Fi
n
access point to a LAN interface or to a bridge. See
more information.
Additional configuration items
Determine whether to broadcast the access point's SSID.
n
Determine whether to isolate clients connected to this access point, so that they cannot
n
communicate with each other.
The amount of time to wait before changing the group key.
n
To configure a Wi-Fi access point to use personal security:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Access points.
4. Create a new access point or modify an existing access point:
To create a new access point, for Add WiFi access point:, type a name for the access
n
point and click .
To modify an existing access point, click to expand the access point.
n
The Wi-Fi access point configuration window is displayed.
5. For SSID, type the SSID. Up to 32 characters are allowed.
Digi Connect EZ 4/4i User Guide
Configure a Wi-Fi access point with personal security
Configure a LAN
and
Configure a bridge
for
230
Advertisement
Table of Contents
