Table of Contents
Advertisement
Hardware
Change the password on the Connect EZ
The unique, factory-assigned password for the default admin user account is printed on the bottom
label of the device and on the loose label included in the package. For ease of use, you may want to
change the password from the default.
If you erase the device configuration or reset the device to factory defaults, the password for the
admin user will revert to the original, factory-assigned default password.
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System > Device Configuration. The Configuration window appears.
3. Click Authentication > Users > Admin.
4. For Password, enter the new password. The password must be at least eight characters long
and must contain at least one uppercase letter, one lowercase letter, one number, and one
special character.
5. Click Apply to save the configuration and apply the change.
For more detailed information about this process, see
user.
Cellular connection: Insert the CORE module
This section explains how to connect the Digi CORE® module and cellular antennas to the Connect EZ
hardware.
Prerequisites
Activated SIM card from your cellular network provider.
n
Digi CORE module. This may be included with your device. If it is not, you must purchase one
n
separately.
To connect the hardware and connect to the cellular network:
Digi Connect EZ 4/4i User Guide
Change the password on the Connect EZ
Change the default password for the admin
35
Advertisement
Table of Contents
