Digi Connect EZ 4 User Manual page 124

Interfaces
eth2
eth2
loopback
modem
modem
>
3. Additional information can be displayed by using the
> show network verbose
Interface
Weight
----------------
----
defaultip
defaultlinklocal
eth2
eth2
loopback
modem
modem
>
4. Enter show network interface name at the Admin CLI prompt to display additional
information about a specific WAN. For example, to display information about ETH1, enter show
network interface eth1:
> show network interface eth1
wan1 Interface Status
---------------------
Device
Zone
IPv4 Status
IPv4 Type
IPv4 Address(es)
IPv4 Gateway
IPv4 MTU
IPv4 Metric
IPv4 Weight
IPv4 DNS Server(s)
IPv6 Status
IPv6 Type
IPv6 Address(es)
IPv6 Gateway
IPv6 MTU
Digi Connect EZ 4/4i User Guide
IPv4 up 192.168.2.1/24
IPv6 up fd00:2704::1/48
IPv4 up 127.0.0.1/8
IPv4 up 10.200.1.101/30
IPv6 down
Proto Status Type
----- ------- ------
IPv4 up static
IPv4 up static
IPv4 up static
IPv6 up static
IPv4 up static
IPv4 up modem
IPv6 down modem
: eth1
: external
: up
: dhcp
: 10.10.10.10/24
: 10.10.10.1
: 1500
: 1
: 10
: 10.10.10.2, 10.10.10.3
: up
: dhcpv6
: fe00:2404::240:f4ff:fe80:120/64
: ff80::234:f3ff:ff0e:4320
: 1500
Wide Area Networks (WANs)
show network verbose command:
Zone Device
-------- --------
setup eth2
setup eth2
internal eth2
internal eth2
loopback loopback
external wwan1
external wwan1
Metric
------ --
10 10
0 10
5 10
5 10
0 10
3 10
3 10
124