Table of Contents
Advertisement
Hotspot
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Bridges > hotspot_bridge > Devices.
4. Click the to add a new device.
5. By default, For Device, select the appropriate Ethernet port.
By default, the ETH1 device is configured as the device for the ETH1 interface, and ETH2 is
configured as a device in the LAN1 bridge, which is used by the ETH2 interface. As a result,
when you add an Ethernet port to the hotspot, you may need to reconfigure the Ethernet port
configuration for other interfaces. For example, to remove the ETH2 port from the LAN1
bridge:
a. Click Network > Bridges > LAN1 > Devices.
b. Click the ... menu icon next to the Ethernet: ETH2 device entry and select Delete.
6. Click Apply to save the configuration and apply the change.
Digi Connect EZ 4/4i User Guide
Hotspot configuration
275
Advertisement
Table of Contents
