Uk Conformity Assessed (Ukca) Labeling Requirements - Digi Connect EZ 4 User Manual

Digi Connect EZ regulatory and safety statements
The CE mark shall consist of the initials "CE" taking the following form:
If the CE marking is reduced or enlarged, the proportions given in the above graduated
n
drawing must be respected.
The CE marking must have a height of at least 5 mm except where this is not possible on
n
account of the nature of the apparatus.
The CE marking must be affixed visibly, legibly, and indelibly.
n

UK Conformity Assessed (UKCA) labeling requirements

See guidance/using-the-ukca-marking
You must make sure that:
If you reduce or enlarge the size of your marking, the letters forming the UKCA marking must
n
be in proportion to the version set out below.
The UKCA marking is at least 5 mm in height – unless a different minimum dimension is
n
specified in the relevant legislation.
The UKCA marking is easily visible, legible (from 1 January 2023 it must be permanently
n
attached).
The UKCA marking can take different forms (for example, the color does not have to be solid),
n
as long as it remains visible, legible and maintains the required proportions.
Digi Connect EZ 4/4i User Guide
CE and UKCA OEM labeling requirements
for further details.
929