Table of Contents
Advertisement
Interfaces
MAC address denylist and allowlist.
n
To create a new LAN or edit an existing LAN:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create the LAN or select an existing LAN:
To create a new LAN, for Add interface, type a name for the LAN and click .
n
To edit an existing LAN, click to expand the LAN.
n
The Interface configuration window is displayed.
New LANs are enabled by default. To disable, click Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select the appropriate firewall zone. See
information.
7. For Device, select an Ethernet device, a Wi-Fi access point, or a bridge. See
information about bridging.
8. (Optional) Click to expand 802.1x to configure 802.1x port based network access control.
The Connect EZ can function as an 802.1x authenticator; it does not function as an 802.1x
supplicant.
a. Click to expand Authentication.
b. Click Enable server to enable the 802.1x authenticator on the Connect EZ device.
c. Type the Server IP address of the authentication server.
Digi Connect EZ 4/4i User Guide
Local Area Networks (LANs)
Firewall configuration
for further
Bridging
for more
129
Advertisement
Table of Contents
