Digi Connect EZ 4 User Manual page 77

Hide thumbs Also See for Connect EZ 4:

Table of Contents

where value is one of:

ping: Tests connectivity by sending an ICMP echo request to a specified hostname or IP

Specify the hostname or IP address:

(Optional) Set the size, in bytes, of the ping packet:

dns: Tests connectivity by sending a DNS query to the specified DNS server.

Specify the DNS server. Allowed value is the IP address of the DNS server.

dns_configured: Tests connectivity by sending a DNS query to the DNS servers

configured for this interface.

http: Tests connectivity by sending an HTTP or HTTPS GET request to the specified URL.

Specify the url:

where value uses the format http[s]://hostname/[path]

interface_up: The interface is considered to be down based on the interfaces down

time, and the amount of time an initial connection to the interface takes before this test

is considered to have failed.

(Optional) Set the amount of time that the interface can be down before this test is

considered to have failed:

where value is any number of weeks, days, hours, minutes, or seconds, and takes

the format number{w|d|h|m|s}.

For example, to set interface_down_time to ten minutes, enter either 10m or 600s:

Digi Connect EZ 4/4i User Guide

(config network interface my_wan ipv4 surelink target 0)> ping_