Table of Contents
Advertisement
Wi-Fi
c. Create a firewall filter to provide internet access for the LAN2_isolation_zone:
i. For Add packet filter, click .
ii. For Label, type Allow LAN2_isolation_zone to External.
iii. For Source zone, select LAN2_isolation_zone.
iv. For Destination zone, select External.
d. Create a firewall filter to drop traffic from the Internal zone (used by the LAN1 interface)
to the LAN2_isolation_zone:
i. Click Firewall > Packet filtering.
ii. For Add packet filter, click .
iii. For Label, type Drop traffic from Internal to LAN2_isolation_zone.
iv. For Action, select Drop.
v. For Source zone, select Internal.
vi. For Destination zone, select LAN2_isolation_zone.
e. Rearrange the firewall filters.
Firewall filters are applied in the order that they are listed. As a result, in order to drop
traffic from the Internal zone to the LAN2_isolation_zone, this filter must be listed prior
to the Allow all outgoing traffic filter, which allows the Internal zone to have access to
any zone.
To move the Drop traffic from Internal to LAN2_isolation_zone filter to the top of the
list:
i. Click the filter title.
ii. Drag-and-drop the filter to the top of the list.
4. Create a new LAN:
By default, the Connect EZ device comes with one preconfigured LAN, which includes the
default access point. We will use that LAN for the access point, and create a new LAN for the
access point.
Digi Connect EZ 4/4i User Guide
Isolate Wi-Fi clients
245
Advertisement
Table of Contents
