Digi Connect EZ 4 User Manual page 254

Wi-Fi
n
Digi Connect EZ 4/4i User Guide
wpa2:
i. Set the Extensible Authentication Protocol (EAP):
(config network wifi client new_client)> ssid 0 encryption
eap_type value
(config network wifi client new_client)>
where value is one of:
peap: Username/password authentication. If peap is set:
l
i. Set the username:
(config network wifi client new_client)> ssid 0
encryption id_wpa2 username
(config network wifi client new_client)>
ii. Set the password:
(config network wifi client new_client)> ssid 0
encryption password_wpa2 password
(config network wifi client new_client)>
scep: Simple Certificate Enrollment Protocol (SCEP) certificate
l
management. If scep is set:
i. Set the username:
(config network wifi client new_client)> ssid 0
encryption id_wpa2 username
(config network wifi client new_client)>
ii. Set the SCEP client:
i. Use the ? to determine available SCEP clients:
(config network wifi client new_client)> ssid 0
encryption scep_client ?
SCEP Client: The SCEP client which this Wi-Fi
client will use to download the
necessary keys and certificates from the SCEP
server.
Format:
SCEP_test_client
SCEP_test_client1
Current value:
(config network wifi client new_client)>
ii. Set the SCEP client, for example:
Configure a Wi-Fi client and add client networks
254