Configure The Hotspot To Use Radius Users Authentication - Digi Connect EZ 4 User Manual

Hide thumbs Also See for Connect EZ 4:
Table of Contents

Advertisement

Hotspot
g. (Optional) Enable Swap Octets to swap the meaning of the input octets/packets and
output octets/packets RADIUS attributes. This can fix issues if the data limits and/or
accounting reports appear to be reversed on the RADIUS server:
(config)> network hotspot hotspot_name radius swap octets true
(config)>
The default is disabled.
6. Set walled garden settings.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of the RADIUS server(s) that are being
used for authentication.
Add domains that can be accessed by the client prior to authentication:
n
(config network hotspot new_hotspot)> add walled_garden domains end
domain_name
(config network hotspot new_hotspot)>
Repeat to add additional domains.
Add IP addresses and subnets that can be accessed by the client prior to
n
authentication:
(config network hotspot new_hotspot)> add walled_garden subnets end
value
(config network hotspot new_hotspot)>
where value is an IPv4 address and optional subnet mask, using the format IPv4_
address[/netmask], or the keyword any.
Repeat to add additional IP addresses or subnets.
7. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Configure the hotspot to use RADIUS users authentication

RADIUS users authentication requires each hotspot user to enter a username and password. Users are
created on an external RADIUS server, and the username and password is validated by the external
RADIUS server.
By default, the router redirects unauthenticated users to the HTML authentication page located on the
router at etc/config/hotspot/login.html. You can customize the authentication page as needed, or
host an authentication page on a remote server. See
information.
Digi Connect EZ 4/4i User Guide
Customize the hotspot login page
Hotspot configuration
for further
294

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect ez 4i

Table of Contents