Table of Contents
Advertisement
System administration
Note
To clear the custom default configuration, press the RESET button, wait for the device to reboot,
then press the RESET button again.
Required configuration items
Custom factory default file
n
WebUI
1. Log into the Connect EZ WebUI as a user with Admin access.
2. Configure your Connect EZ device to match the desired custom factory default configuration.
For example, you may want to configure the device to use a custom APN or a particular
network configuration, so that when you reset the device to factory defaults, it will
automatically have your required network configuration.
3. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
4. In the Configuration backup section, click SAVE.
Do not set a Passphrase for the configuration backup. The file will be downloaded using your
browser's standard download process.
5. After the configuration backup file has been downloaded, rename the file to:
custom-default-config.bin
6. Upload the file to the device:
a. From the main menu, select System > Filesystem.
b. Under Default device configuration, click .
Digi Connect EZ 4/4i User Guide
Erase device configuration and reset to factory defaults
768
Advertisement
Table of Contents
