Digi Connect EZ 4 User Manual page 286

Hotspot
/network/wifi/ap/digi_ap
/network/wifi/ap/digi_hotspot_ap
/network/wifi/ap/new_hotspot_ap
Current value:
(config network hotspot new_hotspot)>
b. Add the device:
(config network hotspot new_hotspot)> device /network/bridge/new_
hotspot_bridge
(config network hotspot new_hotspot)>
8. Set the authentication mode:
(config network hotspot new_hotspot)> auth value
(config network hotspot new_hotspot)>
where value is one of:
click_through: Requires each user to accept the terms and conditions.
n
local_shared_password: Requires each user to enter a password. This password is
n
validated locally on the Connect EZ device, and the password is the same for all users.
See
about configuring hotspot for local shared password authentication.
radius_shared_password: Requires each user to enter a password. This password is
n
validated by an external RADIUS server, and the password is the same for all users.
See
information about configuring hotspot for RADIUS shared password authentication.
radius_user: Requires each user to enter username and password credentials that are
n
established on an external RADIUS server. The credentials are validated by the RADIUS
server.
See
configuring hotspot for RADIUS users authentication.
hotspotsystem: Requires each user to be authenticated by HotspotSystem, a cloud
n
hotspot service that supports various free and paid authentication methods, including
social media account, SMS, voucher, and PayPal.
See
configuring hotspot for HotspotSystem authentication.
9. Set the login page source. (This option is not available if auth is set to hotspotsystem.)
(config network hotspot new_hotspot)> login value
(config network hotspot new_hotspot)>
where value is either:
local: Uses an HTML page for authentication that is stored locally on the Connect EZ
n
device's filesystem, in the /etc/config/hotspot directory. Note that the hotspot
directory is not visible until hotspot has been enabled for the first time.
remote: Uses an HTML page for authentication that is served by a remote web server.
n
Digi Connect EZ 4/4i User Guide
Configure the hotspot to use local shared password authentication
Configure the hotspot to use RADIUS shared password authentication
Configure the hotspot to use RADIUS users authentication
Configure the hotspot to use HotspotSystem authentication
Hotspot configuration
for information
for
for information about
for information about
286