Configure System Information - Digi Connect EZ 4 User Manual

System administration
Show more detailed system information:
n
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system verbose at the prompt:
> show system verbose
(541317s)
>

Configure system information

You can configure information related to your Connect EZ device, such as providing a name and
location for the device.
Configuration items
A name for the device.
n
The name of a contact for the device.
n
Digi Connect EZ 4/4i User Guide
Model
Serial Number
SKU
Hostname
MAC Address
Hardware Version
Firmware Version
Alt. Firmware Version
Alt. Firmware Build Date : Thurs, 03 March 2022 10:16:23
Bootloader Version
Schema Version
Timezone
Current Time
CPU
Uptime
Load Average
RAM Usage
Temperature
Disk
----
Load Average
RAM Usage
Disk /etc/config Usage
Disk /opt Usage
Disk /overlay Usage
Disk /tmp Usage
Disk /var Usage
Configure system information
: Digi Connect EZ
: Connect EZ-000065
: Connect EZ
: Connect EZ
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 22.2.9.85
: 22.2.9.85
: 19.7.23.0-15f936e0ed
: 715
: UTC
: Thurs, 03 March 2022 10:16:23 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds
: 0.01, 0.03, 0.02
: 119.554MB/1878.984MB(6%)
: 40C
: 0.09, 0.10, 0.08
: 127.843MB/1880.421MB(6%)
: 18.421MB/4546.371MB(0%)
: -4523.-46MB/549.304MB(-822%)
: MB/MB(%)
: 0.007MB/256.0MB(0%)
: 1.765MB/256.0MB(1%)
751