Run A Python Application At The Shell Prompt - Digi Connect EZ 4 User Manual

Hide thumbs Also See for Connect EZ 4:

Table of Contents

Applications

1. Log into the Connect EZ command line as a user with Admin access.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

show scripts

> show scripts

3. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Run a Python application at the shell prompt

Python applications can be run from a file at the shell prompt. The Python application will run until it

completes, displaying output and prompting for additional user input if needed. To interrupt the

application, enter CTRL-C.

Python applications cannot be run from the Admin CLI. You must access the device shell in order

to run Python applications from the command line. See

configuring authentication groups that include shell access.

1. Upload the Python application to the Connect EZ device:

a. Log into the Connect EZ WebUI as a user with Admin access.

b. On the menu, click System. Under Administration, click File System.

The File System page appears.

Digi Connect EZ 4/4i User Guide

command at the system prompt:

Run a Python application at the shell prompt

Authentication groups

for information about

Connect ez 4i